佳 盼 塑 胶
JIA PAN SU JIAO
/ Product details
/ classification
PBT IQ420HP Resin 含30%玻纤增强,食品级
VALOX™ PBT IQ420HP Resin
30%玻璃纤维增强
聚对苯二甲酸丁酯
SABIC Innovative Plastics (Europe-Africa-Middle East)
产品说明
Environmentally responsible, low carbon footprint Valox iQ* resin - Valox* iQ420HP resin is made using iQ-PBT resin and 30% glass fiber reinforcement. Valox* iQ420HP may be used for the production of food contact articles intended for repeat use (and not for single use) in contact with all food types, and under all conditions of use per FDA table of food types, with the exception of irradiation and cooking/baking at temperatures above 250 degrees F. This includes microwaving within these same temperature constraints. If colorants are added to the resin, these must be evaluated separately for their appropriateness for food contact applications.
增强填料：含30%玻璃纤维
材料特点：环保低碳排放PBT树脂,食品级
定属记号：PBT
塑料牌号：PBT IQ420HP
加工方法：注射成型
材料物性
|
MECHANICAL |
Value |
Unit |
Standard |
|
Tensile Stress,yld,Type I,5 mm/min |
1160 |
kgf/cm² |
ASTM D 638 |
|
Tensile Stress,brk,Type I,5 mm/min |
1160 |
kgf/cm² |
ASTM D 638 |
|
Tensile Strain,yld,Type I,5 mm/min |
2.2 |
% |
ASTM D 638 |
|
Tensile Strain,brk,Type I,5 mm/min |
2.2 |
% |
ASTM D 638 |
|
Tensile Modulus,5 mm/min |
120300 |
kgf/cm² |
ASTM D 638 |
|
Flexural Stress,yld,1.3 mm/min,50 mm span |
2140 |
kgf/cm² |
ASTM D 790 |
|
Flexural Modulus,1.3 mm/min,50 mm span |
92700 |
kgf/cm² |
ASTM D 790 |
|
Tensile Stress,yield,5 mm/min |
139 |
MPa |
ISO 527 |
|
Tensile Stress,break,5 mm/min |
139 |
MPa |
ISO 527 |
|
Tensile Strain,yield,5 mm/min |
1.6 |
% |
ISO 527 |
|
Tensile Strain,break,5 mm/min |
1.6 |
% |
ISO 527 |
|
Tensile Modulus,1 mm/min |
10700 |
MPa |
ISO 527 |
|
Flexural Stress,yield,2 mm/min |
210 |
MPa |
ISO 178 |
|
Flexural Modulus,2 mm/min |
9100 |
MPa |
ISO 178 |
|
IMPACT |
Value |
Unit |
Standard |
|
Izod Impact,unnotched,23℃ |
78 |
cm-kgf/cm |
ASTM D 4812 |
|
Izod Impact,notched,23℃ |
8 |
cm-kgf/cm |
ASTM D 256 |
|
Izod Impact,notched,-30℃ |
8 |
cm-kgf/cm |
ASTM D 256 |
|
Instrumented Impact Total Energy,23℃ |
71 |
cm-kgf |
ASTM D 3763 |
|
Izod Impact,notched 80*10*4 +23℃ |
8 |
kJ/m² |
ISO 180/1A |
|
Izod Impact,notched 80*10*4 -30℃ |
8 |
kJ/m² |
ISO 180/1A |
|
Charpy 23℃,V-notch Edgew 80*10*4 sp=62mm |
14 |
kJ/m² |
ISO 179/1eA |
|
THERMAL |
Value |
Unit |
Standard |
|
Vicat Softening Temp,Rate B/50 |
206 |
℃ |
ASTM D 1525 |
|
HDT,1.82 MPa,3.2mm,unannealed |
203 |
℃ |
ASTM D 648 |
|
CTE,-40℃ to 40℃,flow |
2.5E-05 |
1/℃ |
ASTM E 831 |
|
CTE,-40℃ to 40℃,xflow |
8.9E-05 |
1/℃ |
ASTM E 831 |
|
CTE,-40℃ to 40℃,flow |
2.5E-05 |
1/℃ |
ISO 11359-2 |
|
CTE,-40℃ to 40℃,xflow |
8.9E-05 |
1/℃ |
ISO 11359-2 |
|
Ball Pressure Test,approximate maximum |
200 |
℃ |
IEC 60695-10-2 |
|
Vicat Softening Temp,Rate B/50 |
206 |
℃ |
ISO 306 |
|
Vicat Softening Temp,Rate B/120 |
206 |
℃ |
ISO 306 |
|
HDT/Bf,0.45 MPa Flatw 80*10*4 sp=64mm |
217 |
℃ |
ISO 75/Bf |
|
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm |
205 |
℃ |
ISO 75/Af |
|
PHYSICAL |
Value |
Unit |
Standard |
|
Specific Gravity |
1.54 |
- |
ASTM D 792 |
|
Mold Shrinkage,flow,3.2 mm(5) |
0.5-0.7 |
% |
SABIC Method |
|
Mold Shrinkage,xflow,3.2 mm(5) |
0.8-1 |
% |
SABIC Method |
|
Melt Flow Rate,250℃/5.0 kgf |
52 |
g/10 min |
ASTM D 1238 |
|
Density |
1.54 |
g/cm³ |
ISO 1183 |
|
Water Absorption,(23℃/sat) |
0.09 |
% |
ISO 62 |
|
Moisture Absorption(23℃/50% RH) |
0.1 |
% |
ISO 62 |
|
Melt Volume Rate,MVR at 250℃/5.0 kg |
38 |
cm³/10 min |
ISO 1133 |
|
Injection Molding |
Value |
Unit |
|
|
Drying Temperature |
120 |
℃ |
|
|
Drying Time |
3-4 |
hrs |
|
|
Drying Time(Cumulative) |
12 |
hrs |
|
|
Maximum Moisture Content |
0.02 |
% |
|
|
Melt Temperature |
250-265 |
℃ |
|
|
Nozzle Temperature |
245-260 |
℃ |
|
|
Front-Zone 3 Temperature |
250-265 |
℃ |
|
|
Middle-Zone 2 Temperature |
245-260 |
℃ |
|
|
Rear-Zone 1 Temperature |
240-255 |
℃ |
|
|
Mold Temperature |
65-90 |
℃ |
|
|
Back Pressure |
0.3-0.7 |
MPa |
|
|
Screw Speed |
50-80 |
rpm |
|
|
Shot to Cylinder Size |
40-80 |
% |
|
|
Vent Depth |
0.025-0.038 |
mm |
|
PBT VALOX™ RESIN
Semi-crystalline polybutylene terephthalate, one of the most widely-used engineering materials, shows low moisture and thermal expansion and offers outstanding wear and friction properties. With good strength at high temperatures, it has good electrical properties and flame resistance.
