佳 盼 塑 胶
JIA PAN SU JIAO
/ Product details
/ classification
POM LX90Z XAP 抗紫外线,低挥发
HOSTAFORM LX90Z XAP² ™ | POM | UV Resistant
Description
Preliminary Data Sheet
Hostaform® acetal copolymer grade LX90Z XAP2 ™ is UV stabilized material available in a range of molded in metallic colors generally for automotive interior applications. In addition, Hostaform® LX90Z XAP2 ™ has lower volatile emissions as required for some automotive interiors.
Besides material, optimal finish for specialty metallic parts is dependent on proper drying, gate design, knit line locations, and special processing. Please contact Ticona Technical Service for assistance with your application.
Low Emission Performance [VDA-275] <5 PPM
|
ISO Data |
Mechanical properties |
Value |
Unit |
Test Standard |
|
Phys |
Density |
1430 |
kg/m³ |
ISO 1183 |
|
Melt volume rate (MVR) |
8 |
cm³/10min |
ISO 1133 |
|
|
MVR test temperature |
190 |
℃ |
ISO 1133 |
|
|
MVR test load |
2.16 |
kg |
ISO 1133 |
|
|
Mold shrinkage - parallel |
2.3 |
% |
ISO 294-4 |
|
|
Mold shrinkage - normal |
1.4 |
% |
ISO 294-4 |
|
|
Water absorption (23℃-sat) |
0.75 |
% |
ISO 62 |
|
|
Mech |
Mechanical properties |
Value |
Unit |
Test Standard |
|
Tensile modulus (1mm/min) |
2700 |
MPa |
ISO 527-2/1A |
|
|
Tensile stress at yield (50mm/min) |
54 |
MPa |
ISO 527-2/1A |
|
|
Tensile strain at yield (50mm/min) |
8 |
% |
ISO 527-2/1A |
|
|
Flexural modulus (23℃) |
2900 |
MPa |
ISO 178 |
|
|
Charpy notched impact strength @ 23℃ |
4 |
kJ/m² |
ISO 179/1eA |
|
|
Charpy notched impact strength @ -30℃ |
4 |
kJ/m² |
ISO 179/1eA |
|
|
Therm |
Thermal properties |
Value |
Unit |
Test Standard |
|
Melting temperature (10℃/min) |
166 |
℃ |
ISO 11357-1,-2,-3 |
|
|
DTUL @ 1.8 MPa |
90 |
℃ |
ISO 75-1/-2 |
|
|
DTUL @ 0.45 MPa |
147 |
℃ |
ISO 75-1/-2 |
|
|
Coeff.of linear therm. expansion (parallel) |
0.9 |
E-4/℃ |
ISO 11359-2 |
|
|
Coeff.of linear therm. expansion (normal) |
1 |
E-4/℃ |
ISO 11359-2 |
|
|
SpecProd |
Test specimen production |
Value |
Unit |
Test Standard |
|
Processing conditions acc. ISO |
9988-2 |
- |
Internal |
Processing
Pre Drying
Drying is required for this material to prevent poor appearance and performance of the part.
Drying time (h)：3
Drying temperature (℃)：105 - 110
