佳 盼 塑 胶
JIA PAN SU JIAO
/ Product details
/ classification
PPS MT9205C4 挤出用,食品医疗级
FORTRON® MT® 9205C4 SD3039 BLACK
FORTRON® MT® 9205C4 SF3001 NATURAL
FORTRON MT9205C4 | PPS | Medical Technology
Description
Fortron MT9205C4 is an unfilled grade with a low melt viscosity used for custom compounding and extrusion. It demonstrates an excellent chemical resistance and thermal stability. Components made with this base resin may be used for medical, dental, pharmaceutical, and certain food handling applications. Fortron MT9205C4 is in compliance with ISO 10993, USP Class VI, and is included in the Fortron Drug and Device Master Files at the FDA. It complies with the FDA Food Contact Notification (FCN-No. 40) for repeat-use applications.
|
ISO Data |
Physical properties |
Value |
Unit |
Test Standard |
|
Phys |
Density |
1350 |
kg/m³ |
ISO 1183 |
|
Water absorption (23℃-sat) |
0.02 |
% |
ISO 62 |
|
|
Mech |
Mechanical properties |
Value |
Unit |
Test Standard |
|
Tensile modulus (1mm/min) |
4000 |
MPa |
ISO 527-2/1A |
|
|
Tensile stress at break (5mm/min) |
65 |
MPa |
ISO 527-2/1A |
|
|
Tensile strain at break (5mm/min) |
2 |
% |
ISO 527-2/1A |
|
|
Flexural modulus (23℃) |
3900 |
MPa |
ISO 178 |
|
|
Flexural strength (23℃) |
120 |
MPa |
ISO 178 |
|
|
Notched impact strength (Izod) @ 23℃ |
2 |
kJ/m² |
ISO 180/1A |
|
|
Therm |
Thermal properties |
Value |
Unit |
Test Standard |
|
Melting temperature (10℃/min) |
280 |
℃ |
ISO 11357-1,-2,-3 |
|
|
Glass transition temperature (10℃/min) |
90 |
℃ |
ISO 11357-1,-2,-3 |
|
|
DTUL @ 1.8 MPa |
115 |
℃ |
ISO 75-1/-2 |
|
|
DTUL @ 8.0 MPa |
95 |
℃ |
ISO 75-1/-2 |
|
|
Eiec |
Electrical properties |
Value |
Unit |
Test Standard |
|
Relative permittivity - 10kHz |
3.3 |
- |
IEC 60250 |
|
|
Relative permittivity - 1 MHz |
3.2 |
- |
IEC 60250 |
|
|
Volume resistivity |
1E13 |
Ohm*m |
IEC 60093 |
Processing
Pre Drying
Necessary low maximum residual moisture content: 0.02%
FORTRON should in principle be predried. Because of the necessary low maximum residual moisture content the use of dry air dryers is recommended. The dew point should be =< - 30℃. The time between drying and processing should be as short as possible.
For subsequent storage the material should be stored dry in the dryer until processed (<= 60 h).
Drying time (h):3 - 4
Drying temperature (℃):110 - 120
