佳 盼 塑 胶
JIA PAN SU JIAO
/ Product details
/ classification
PA6 PLS93G35DH1 BK549 含35%玻纤,耐焊接尼龙
Zytel® PLS93G35DH1 BK549 | PA6-GF35 ZYTEL® PLUS NYLON RESIN
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa, Global
Processing
Injection Moulding
Delivery form
Pellets
Additives
Release agent
Special characteristics
Heat stabilised or stable to heat
Product Text
Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured.
The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
Zytel® PLS93G35DH1 is a 35% glass fibre reinforced, DuPont™ SHIELD protected polyamide 6 for injection moulding. It provides exceptional welding resistance and excellent heat resistance.
PROPERTIES
|
Rheological properties |
dry / cond |
Unit |
Test Standard |
|
|
Rheo |
Moulding shrinkage,parallel |
0.2 / * |
% |
ISO 294-4,2577 |
|
Moulding shrinkage,normal |
0.7 / * |
% |
ISO 294-4,2577 |
|
|
Mechanical properties |
dry / cond |
Unit |
Test Standard |
|
|
Mech |
Tensile Modulus |
12000 / 6500 |
Mpa |
ISO 527-1/-2 |
|
Stress at break |
200 / 120 |
Mpa |
ISO 527-1/-2 |
|
|
Strain at break |
3.5 / 7 |
% |
ISO 527-1/-2 |
|
|
Charpy impact strength |
|
|
ISO 179/1eU |
|
|
23℃ |
100 / 90 |
kj/㎡ |
||
|
-30℃ |
80 / 80 |
kj/㎡ |
||
|
Charpy notched impact strength |
|
|
ISO 179/1eA |
|
|
23℃ |
15 / - |
kj/㎡ |
||
|
-30℃ |
13 / - |
kj/㎡ |
||
|
Thermal properties |
dry / cond |
Unit |
Test Standard |
|
|
Therm |
Melting temperature,10℃/min |
224 / * |
℃ |
ISO 11357-1/-3 |
|
Temp. of deflection under load,1.8 MPa |
212 / * |
℃ |
ISO 75-1/-2 |
|
|
Temp. of deflection under load,0.45 MPa |
220 / * |
℃ |
ISO 75-1/-2 |
|
|
Coeff. of linear therm. expansion,parallel |
7 / * |
E-6/K |
ISO 11359-1/-2 |
|
|
Coeff. of linear therm. expansion,normal |
100 / * |
E-6/K |
ISO 11359-1/-2 |
|
|
Flammability |
dry / cond |
Unit |
Test Standard |
|
|
Flam |
Burning Behav. at 1.5 mm nom. thickn. |
HB / * |
class |
IEC 60695-11-10 |
|
Thickness tested |
1.5 / * |
mm |
IEC 60695-11-10 |
|
|
Electrical properties |
dry / cond |
Unit |
Test Standard |
|
|
Elec |
Volume resistivity |
>1E13 / 7E11 |
Ohm*m |
IEC 60093 |
|
Surface resistivity |
* / 6E13 |
Ohm |
IEC 60093 |
|
|
Comparative tracking index |
550 / - |
- |
IEC 60112 |
|
|
Other properties |
dry / cond |
Unit |
Test Standard |
|
|
Other |
Water absorption,2mm |
2 / * |
% |
Sim. to ISO 62 |
|
Density |
1400 / - |
kg/m³ |
ISO 1183 |
|
|
Rheological calc. properties |
Value |
Unit |
Test Standard |
|
|
RheoCalc |
Density of melt |
1240 |
kg/m³ |
- |
|
Thermal conductivity of melt |
0.28 |
W/(m K) |
- |
|
|
Spec. heat capacity melt |
2100 |
J/(kg K) |
- |
|
|
Ejection temperature |
163 |
℃ |
- |
|
|
Min. mould temperature |
70 |
℃ |
- |
|
|
Max. mould temperature |
120 |
℃ |
- |
|
|
Min. melt temperature |
260 |
℃ |
- |
|
|
Max. melt temperature |
280 |
℃ |
- |
|
Chem
Chemical Media Resistance
Mineral oils
√ SAE 10W40 multigrade motor oil (130℃)
Other
× Water (90℃)
Symbols used:
√ possibly resistant
Defined as: Supplier has sufficient indication that contact with chemical can be potentially accepted under the intended use conditions and expected service life. Criteria for assessment have to be indicated (e.g. surface aspect, volume change, property change).
× not recommended - see explanation
Defined as: Not recommended for general use. However, short-term exposure under certain restricted conditions could be acceptable (e.g. fast cleaning with thorough rinsing, spills, wiping, vapor exposure).
